to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation ( http://www.renesas.com ) send any inquiries to http://www.renesas.com/inquiry .
notice 1. all information included in this document is current as of th e date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology de scribed in this document for any purpose re lating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or om issions from the information included herein. 7. renesas electronics products are classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product depends on the product?s quality grade, as indicated below. you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application categorized as ?specific? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intended where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electronics data sheets or data books, etc. ?standard?: computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. ?high quality?: transportation equipment (automobiles, trains, ship s, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specifically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use re nesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of c ontrolled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any fo rm, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
rev.1.00, apr.08.2 004, page 1 of 7 rd74lvc04b hex inverters rej03d0217?0100z rev.1.00 apr.08.2004 description the rd74lvc04b has six inverters in a 14-pin package. low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. features ? v cc = 1.65 v to 5.5 v ? all inputs v ih (max.) = 5.5 v (@v cc = 0 v to 5.5 v) ? typical v ol ground bounce < 0.8 v (@v cc = 3.3 v, ta = 25c) ? typical v oh undershoot > 2.0 v (@v cc = 3.3 v, ta = 25c) ? high output current 4 ma (@v cc = 1.65 v) 8 ma (@v cc = 2.3 v) 12 ma (@v cc = 2.7 v) 24 ma (@v cc = 3.0 v to 5.5 v) ? ordering information part name package type package code package abbreviation taping abbreviation (quantity) rd74lvc04bfpel sop?14 pin (jeita) fp?14dav fp el (2,000 pcs/reel) rd74lvc04btell tssop?14 pin ttp?14dv t ell (2,000 pcs/reel) function table input a output y hl lh h : high level l : low level
rd74lvc04b rev.1.00, apr.08.2 004, page 2 of 7 pin arrangement (top view) 11 12 13 14 v cc 6a 6y 5a 5y 4a 1 2 3 4 5 6 7 8 9 10 1a gnd 4y 1y 2a 2y 3a 3y absolute maximum ratings item symbol ratings unit conditions supply voltage range v cc ?0.5 to 7.0 v input diode current i ik ?50 ma v i = ?0.5 v input voltage v i ?0.5 to 7.0 v ?50 ma v o = ?0.5 v output diode current i ok 50 ma v o = v cc +0.5 v output voltage v o ?0.5 to v cc +0.5 v output current i o 50 ma v cc , gnd current / pin i cc or i gnd 100 ma storage temperature tstg ?65 to +150 c note: the absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time.
rd74lvc04b rev.1.00, apr.08.2 004, page 3 of 7 recommended operating conditions item symbol ratings unit conditions 1.5 to 5.5 data hold supply voltage v cc 1.65 to 5.5 v at operation v i 0 to 5.5 a input / output voltage v o 0 to v cc v y operating temperature ta ?40 to 85 c ?4 v cc = 1.65 v ?8 v cc = 2.3 v ?12 v cc = 2.7 v i oh ?24 ma v cc = 3.0 v to 5.5 v 4v cc = 1.65 v 8v cc = 2.3 v 12 v cc = 2.7 v output current i ol 24 ma v cc = 3.0 v to 5.5 v 20 v cc = 1.65 v to 2.7 v input rise / fall time *1 t r , t f 10 ns/v v cc = 3.0 v to 5.5 v notes: 1. this item guarantees maximum limit when one input switches. waveform: refer to te st circuit of switching characteristics.
rd74lvc04b rev.1.00, apr.08.2 004, page 4 of 7 electrical characteristics ta = ?40 to 85c item symbol v cc (v) min max unit test conditions 1.65 to 1.95 v cc 0.65 ? 2.3 to 2.7 1.7 ? 2.7 to 3.6 2.0 ? v ih 4.5 to 5.5 v cc 0.7 ? v 1.65 to 1.95 ? v cc 0.35 2.3 to 2.7 ? 0.7 2.7 to 3.6 ? 0.8 input voltage v il 4.5 to 5.5 ? v cc 0.3 v 1.65 to 5.5 v cc ?0.2 ? i oh = ?100 a 1.65 1.2 ? i oh = ?4 ma 2.3 1.7 ? i oh = ?8 ma 2.7 2.2 ? 3.0 2.4 ? i oh = ?12 ma 3.0 2.2 ? v oh 4.5 3.8 ? v i oh = ?24 ma 1.65 to 5.5 ? 0.2 i ol = 100 a 1.65 ? 0.45 i ol = 4 ma 2.3 ? 0.7 i ol = 8 ma 2.7 ? 0.4 i ol = 12 ma 3.0 ? 0.55 output voltage v ol 4.5 ? 0.55 v i ol = 24 ma input current i in 0 to 5.5 ? 5.0 a v in = 5.5 v or gnd 2.7 to 3.6 ? 5.0 v in = 3.6 v to 5.5 v i cc 2.7 to 5.5 ? 5.0 a v in = v cc or gnd quiescent supply current ? i cc 2.7 to 3.6 ? 500 a v in = one input at (v cc ?0.6)v, other inputs at v cc or gnd
rd74lvc04b rev.1.00, apr.08.2 004, page 5 of 7 switching characteristics ta = ?40 to 85c item symbol v cc (v) min typ max unit from (input) to (output) 1.80.15 1.0 ? 8.0 2.50.2 1.0 ? 7.5 2.7 1.0 ? 5.5 3.30.3 1.0 ? 4.5 propagation delay time t plh t phl 5.00.5 1.0 ? 4.0 ns a y 1.80.15 ? ? ? 2.50.2 ? ? ? 2.7 ? ? ? 3.30.3 ? ? 1.0 between output pins skew* 1 t oslh t oshl 5.00.5 ? ? 1.0 ns input capacitance c in 3.3 ? 5.0 ? pf note: 1. this parameter is c haracterized but not tested. t oslh = | t plhm ? t plhn |, t oshl = | t phlm ? t phln | operating characteristics ta = 25c item symbol v cc (v) min typ max unit test conditions 1.8 ? 15 ? 2.5 ? 16 ? 3.3 ? 18 ? power dissipation capacitance c pd 5.0 ? 22 ? pf f = 10 mhz
rd74lvc04b rev.1.00, apr.08.2 004, page 6 of 7 test circuit input pulse generator z = 50 out ? v cc output c l r l note: 1. c l includes probe and jig capacitance. waveforms v oh v ol input a 10 % gnd 90 % t r t f 90 % 10 % output y t phl t plh v ih v ref v ref v ref v ref 1.5 v 1.5 v v ref c l r l 1/2 v cc 30 pf 1.0 k ? 500 ? 500 ? 500 ? 500 ? 30 pf 50 pf 50 pf 50 pf 1/2 v cc 1/2 v cc 2.7 v 2.7 v inputs v cc v cc v cc v ih t r /t f v cc = 1.80.15 v v cc = 2.50.2 v v cc = 3.30.3 v v cc = 5.00.5 v v cc = 2.7 v v cc (v) 2 ns 2 ns 2.5 ns 2.5 ns 2.5 ns note: 1. input waveform : prr = 10 mhz, duty cycle 50%.
rd74lvc04b rev.1.00, apr.08.2 004, page 7 of 7 package dimensions package code jedec jeita mass (reference value) fp-14dav ? conforms 0.23 g *ni/pd/au plating *0.20 0.05 *0.40 0.06 0.70 0.20 0.12 0.15 0 ? ? 8 ? m 0.10 0.10 2.20 max 5.5 10.06 1.42 max 14 8 1 7 10.5 max + 0.20 ? 0.30 7.80 1.15 1.27 as of january, 2003 unit: mm package code jedec jeita mass (reference value) ttp-14dv ? ? 0.05 g *ni/pd/au plating 0.50 0.10 0? ? 8? *0.15 0.05 6.40 0.20 0.10 1.10 max 0.13 m 0.65 17 14 8 4.40 5.00 5.30 max 0.83 max *0.20 0.05 0.07 +0.03 ?0.04 1.0 as of january, 2003 unit: mm
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is a lways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placeme nt of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi als. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic ense from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.co m renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500 fax: <1> (408) 382-7501 renesas technology europe limited. dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, united kingdom tel: <44> (1628) 585 100, fax: <44> (1628) 585 900 renesas technology europe gmbh dornacher str. 3, d-85622 feldkirchen, germany tel: <49> (89) 380 70 0, fax: <49> (89) 929 30 11 renesas technology hong kong ltd. 7/f., north tower, world finance centre, harbour city, canton road, hong kong tel: <852> 2265-6688, fax: <852> 2375-6836 renesas technology taiwan co., ltd. fl 10, #99, fu-hsing n. rd., taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology (shanghai) co., ltd. 26/f., ruijin building, no.205 maoming road (s), shanghai 200020, china tel: <86> (21) 6472-1001, fax: <86> (21) 6415-2952 renesas technology singapore pte. ltd. 1, harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas sales offices ? 2004. renesas technology corp., all rights reserved. printed in japan. c olophon .1 .0
|
